Jani Metals Private Limited

A Wide Cable Channel (also known as a wide trunking or cable duct) is a rectangular enclosure designed to route, protect, and organize large volumes of electrical, data, or communication cables. It is widely used in industrial panels, IT rooms, and infrastructure projects for neat, safe, and scalable cable management.

🔧 Key Features of Wide Cable Channels

• Material Options:

  • PVC (Plastic) – non-conductive, lightweight, used for indoor applications

  • GI (Galvanized Iron) – durable and corrosion-resistant, ideal for commercial/industrial use

  • Aluminum – corrosion-resistant and lightweight

  • SS (Stainless Steel) – used in corrosive or hygienic environments (like pharma/food)

• Available Sizes (W × H):

  • 50 mm × 50 mm

  • 100 mm × 100 mm

  • 150 mm × 100 mm

  • 200 mm × 150 mm

  • Up to 600 mm wide or custom

Mild Steel (MS) Channel is a structural steel product with a "C" or "U"-shaped cross-section used for framing, support structures, fabrication, and reinforcement. Known for its strength, versatility, and affordability, MS channels are widely used in construction, engineering, and manufacturing industries.

🔧 Key Features of Mild Steel Channel

• Material:
  Mild Steel (low carbon steel, typically IS 2062 grade in India)

• Cross-Section Shape:
  U- or C-shaped with parallel flanges

• Standard Sizes (Indian Standard):
  Designated as ISMC (Indian Standard Medium Channel)
  Common sizes:

  • ISMC 75 (75×40 mm)

  • ISMC 100 (100×50 mm)

  • ISMC 150 (150×75 mm)

  • ISMC 200 (200×75 mm)

  • ISMC 250 (250×82 mm)

•  

1.5mm C Channel refers to a structural or framing steel channel with a thickness (gauge) of 1.5 mm and a “C”-shaped cross-section. These channels are used for light to medium structural applications where a thinner steel gauge is sufficient.

🔧 Key Features of 1.5mm C Channel

• Material:
  Usually Cold Rolled Steel (CRS), Mild Steel (MS), or Galvanized Steel (GI)

• Thickness:
  1.5 mm (often referred to as gauge or thickness of the steel sheet used to roll the channel)

• Cross-Section:
  “C” shape, with two parallel flanges connected by a vertical web

• Typical Dimensions:
  Dimensions vary widely, but typical C channel widths (web depth) can range from 20 mm up to 150 mm or more, depending on the application. The flange widths and heights also vary accordingly.

• Length:
  Usually supplied in standard lengths like 6 meters, or cut to size as needed.

"Manufacturing by :- G I Cable Tray, G I Ladder Type Tray, G I Raceways, G I All sizes Cover, G I All sizes Band, G I Junction box, C Channel, All sizes Bracket, GI Threaded Rods, Cable ties, G I Flat, G i wire, G i Plate, G i Rods, G i Pipes, G i Nut Bolt & Washers, Copper Strips, Copper wire, Copper Plate, Copper rods, Copper Lux, MS Hot Dip Cable Tray, MS Hot Dip Ladder Type Tray, C i Cover, C i Pipe, Anchor fasteners, Aluminium Lux, Rod Jointer, insulated tapes, Cable Glands, Hole Saw cutter, Lighting arrester, Drill Bits, U Clamps,"